After booting up the PC and returning to the storage information in the BIOS, we can see that the Western Digital drive is indeed being recognized - and if you boot into Windows or whichever operating system you're using, you will see the drive and be able to partition it and format it. Going back to the computer, while the Kapton tape is on the third pin, connect the power cable which will slip right over the tape, and then the data cable. The tape is too long for the pin, so snip off the excess with some scissors. Available as 12VHPWR PCIe 12+4 pin, PCIe 6+2 pin, S-ATA, Multi, CPU and 20+4-pin ATX power cables with different lengths they offer maximum comfort and. I highly recommend that you use an ESD wrist strap while you're doing this, as you are touching the contacts of the drive. Next, on the hard drive, locate the third pin, and gently apply the tape. The goal here is to cut a thin strip of tape - enough to cover that third pin - so take a razor and gently slice off a strip of tape. Then take a piece of cardboard and place it underneath. Take a piece of backing paper from a sheet of labels and place the tape onto it. It's a special type of non-conductive tape that's stable at both low and high temperatures, and is yellowish in color. AM MYT Buy HP ProDesk 600 EliteDesk 800 G1 SFF 6-Pin 4-Drop SATA Power Cable. The first solution involves a piece of Kapton tape to cover that third pin. Read Or Download Diagram Hp Laptop Dc Power For FREE Jack Pinout at 159.
0 Comments
Leave a Reply. |